A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions
Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details).
Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences.
This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat.
This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Cedar.
For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood.
For best results thoroughly shake or stir the paint before use and allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer.
KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings.
FORMULATED FOR USE ON HARDWOODS – This environmentally friendly, water based deck stain is formulated with smaller resin particles that absorb easier into hard or oily wood types, including smooth cedar, redwood, mahogany, and other dense, or difficult to penetrate woods. The result is a better penetrating deck stain that lasts longer.
WATER-BASED, SEMI-TRANSPARENT FINISH – This environmentally friendly, low VOC deck stain protects wood surfaces from fading, graying and damage caused by UV rays. It allows the wood grain to show through with a beautiful semi-transparent, natural matte finish.
EXTREMELY DURABLE, HIGH QUALITY RESINS – DEFY Deck Stain for Hardwoods is made with the highest quality resins available that have better resistance to fading and darkening. The result is a quality wood stain that typically lasts a season or two longer than competitive products.
RESISTS FLAKING AND PEELING – Penetrates deep into wood fibers and helps eliminate surface buildup and peeling.
EASY TO MAINTAIN – When it’s time to do a maintenance coat, there’s no need to sand or strip the surface again. Simply brighten the wood with DEFY Wood Brightener and apply a single maintenance coat of DEFY Deck Stain for Hardwoods.
10. Ready Seal 512 5-Gallon Pail Natural Cedar Exterior Stain and Sealer for Wood
Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
May be applied using sprayer, roller or brush onto the woods surface.
Requires no back brushing and will nerver leave runs, laps, or streaks.
Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
Requires no diluting or thinning prior to spray applications.
Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
Easy maintenance – no sanding or stripping required for re-application
“Goof Proof” application
No laps, runs or streaks
No back brushing
Apply in any temperature
Subject to or will include a PaintCare recycling fee in the following states: CA, OR, CT, VT