What is the Best Live Center For Woodturning of 2022

Are you looking for the best live center for woodturning of the year? We considered quality, price, and performance while making our selection. Over fifty brands were evaluated by our specialists. Finally, we’ve got some remarks. You’ve found the high-quality live center for woodturning you’ve been seeking for! They outperform every other brand by a…

Are you looking for the best live center for woodturning of the year? We considered quality, price, and performance while making our selection. Over fifty brands were evaluated by our specialists. Finally, we’ve got some remarks.

You’ve found the high-quality live center for woodturning you’ve been seeking for! They outperform every other brand by a huge margin.

Comparison Chart for Top Ranked Live Center For Woodturning

Ranking Products Name Action
01 Savannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes Check Price
02 Robust Live Center 2MT, for Woodturning Check Price
03 WEN LA1158 1-5/8-Inch MT2 Tailstock Live Center for Wood Lathes Check Price
04 Taytools 468907 8 Piece Set Live Revolving Center MT2 Taper for Woodturning and Wood Lathes Check Price
05 HFS (R) Heavy Duty Live Tailstock Center (#2 Morse Taper) Check Price
06 WEN LA1334 3/4-Inch MT2 Crown Revolving Live Center for Wood Lathes Check Price
07 PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center Check Price
08 Hurricane Turning Tools, Live Tailstock Center with 60 Degree Point, 2MT, for Wood Lathe Check Price
09 Oneway Live Center Check Price
10 Live Tailstock Center with 60 Degree Cone For Use On Woodturning Lathes (MT2) Check Price

10 Best Live Center For Woodturning Reviews

01 Savannah Heavy Duty Dual Bearing Live Center For Woodworking Lathes and Large or Small Wood Turning Projects. Ultra Smooth Live Center Performance with Minimal Play for MT2 Lathes

41jLihdnL7L. SL500

A lot of wood turners don’t think about the live center that’s in their tailstock until it makes a funny noise, vibrates a little or even worse it seizes up and stops working altogether. In many instances, that funny noise or vibration leads to irritating marks or spirals in your project. This can typically be traced to play on a less than perfect factory lathe issued “live center”. The Precision Machined, Heavy Duty, Dual Bearing Live Center from Savannah addresses this issue and more!

Precision machined to exacting specifications, the Savannah HD Live Center is the ideal live center for novice and professional alike. With its super smooth design, heat sealed double bearings, 3-3/8″ bull nose cone, 60 degree full point cone and removable center spur point this live center is truly a tremendous value that was built to perform.

The High quality dual bearings are heat sealed and permanently lubricated to provide vibration free performance while turning and also provide you with years of dependable use. The live center is housed in a durable casing that is made from machined turned steel alloy and is coated with a black oxide finish.

This live center runs smooth and true during the turning process and may become your go to live center once you start using it. The Heavy Duty Dual Bearing Live Center Includes: a 3-3/8” bull nose reversible cone, 1-5/8” 60 degree full point cone, removable center spur point and a convenient knock out rod. This live center will work on lathes that accept Morse Taper 2 tail stocks.

The Heavy Duty Dual Bearing Live Center has a 3/4” x 10tpi thread which not only allows you to attach the included accessories, it also allows you to create many different types of turning jigs for offset turning. This gives you the ability to create wonderfully unique looking projects that are off center like asymmetrical pendants, candle stick holders and more! With the included accessories you can Turn bowls, platters, dowels, vases, spheres and more!

Check Price at Amazon

01 Robust Live Center 2MT, for Woodturning

31ti0W23FLL. SL500

Robust Live Centers use bigger bearings, and warrants them for five years

The tip of the center extends and reverses to accommodate your turning

The cup center is threaded 3/4‐10 for standard accessories

A 5/16” thru hole accommodates drilling

#2 Morse Taper shank is tapped 3/8-16 for draw bar applications

Check Price at Amazon

03 WEN LA1158 1-5/8-Inch MT2 Tailstock Live Center for Wood Lathes

31niOIzIoSL. SL500

Spacious live center provides support to larger workpieces

Internal ball bearings provide a smooth, concentric ride for your workpiece

Crafted with maximum precision for high accuracy performance

Taper fits perfectly into any lathe with an MT2 tailstock

Measures in at 1-5/8 inches in diameter

Check Price at Amazon

04 Taytools 468907 8 Piece Set Live Revolving Center MT2 Taper for Woodturning and Wood Lathes

31IBWD7jLpL. SL500

This live center set includes a double bearing revolving center with 7 popular accessories.

Center has MT2 taper

Accessories include: 1) large 65d point 0.780” diameter 2) small 55 degree point 0.390” diameter 3) hollow cup or ring center without point with 0.325” bore  4) cup or ring center with point 5) small cone center 0.780” diameter 6) hole boring location pin 0.310” diameter and 7)  hollow center with 0.580” bore for custom supports.

Accessories are secured in place with a rare earth magnet, so not tools required.

Come in a fitted case.

Check Price at Amazon

05 HFS (R) Heavy Duty Live Tailstock Center (#2 Morse Taper)

41e2p3GZPmL. SL500

Size: #2 Morse Taper Cone is 2-1/2″ by 1-11/16″ overall diameter

Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects

Note: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)

Sturdy: Alloy steel shaft construction for ultimate strength and longevity

Packing: Shipped in Protective case for storage

Check Price at Amazon

06 WEN LA1334 3/4-Inch MT2 Crown Revolving Live Center for Wood Lathes

31OZ lYk2QL. SL500

Crafted with maximum precision for high accuracy performance

Internal ball bearings provide a smooth, concentric ride for your workpiece

Spacious multi-tooth live center provides support to larger projects

Crown measures in at 3/4 inches in diameter

Taper fits perfectly into any lathe with an MT2 tailstock

Check Price at Amazon

07 PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center

The PSI Super Center Crown compatible with headstocks with #2MT spindles

Get a better bite on your spindle with more teeth for a strong grip while still providing equal pressure and a positive drive

Spring loaded point simplifies spindle centering and retracts to avoid spitting your work when tailstock pressure is applied

Ships in plastic production sleeves at 4.8-ounces

4.5-by-1.5-by-1.5-inches with 1-inch crown

Check Price at Amazon

08 Hurricane Turning Tools, Live Tailstock Center with 60 Degree Point, 2MT, for Wood Lathe

31KEyMNySHL. SL500

Revolving live center for supporting work when turning “between centers” on the lathe

60 degree point which is the most common configuration for general purpose work

Keeps your work centered on the lathe while giving little or no drag resistance to the headstock drive

Tailstock Mount: #2 MT (Morse Taper)

Material: Steel with internal roller bearings

Check Price at Amazon

09 Oneway Live Center

41junV12wqL. SL500

Size: #2 Morse Taper Cone is 2-1/2″ by 1-11/16″ overall diameter

Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects

Note: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)

Sturdy: Alloy steel shaft construction for ultimate strength and longevity

Packing: Shipped in Protective case for storage

Check Price at Amazon

10 Live Tailstock Center with 60 Degree Cone For Use On Woodturning Lathes (MT2)

31ODRmAaKFL. SL500

Whether you’re a beginner or a professional wood turner, live centers have become a very useful and in all honesty a very necessary lathe accessory when turning between centers. Live centers fit directly into your lathe tailstock and rotates as your stock piece rotates.

This type of action is great for turning because it keeps your wood from burning, yet it holds your stock in place. The live center allows for greater clamping pressures and much better control while still retaining their incredibly smooth rotation.

It is equipped with bearings that allow it rotate at low or high lathe speeds which allows the center to be used on projects as small as pens or as large as pepper mills.The tip or live center cone is at a common 60 degree angle and measures 1-9/32” in diameter.

This allows it to fit inside of pre-bored out holes that are smaller then the cone diameter. Works very well on projects like spindles, dowels, pepper mills and much much more.

ade from heavy duty steel for years of service. Available in MT1 and MT2 sizes which are both sold separately. Please check your lathes opening (Morse Taper) size. Morse Taper sizes vary from lathe to lathe. While the Morse Taper 2 size is more common, many of the smaller lathes today use the MT1 size. Please refer to your lathe owners manual for detailed information about your lathe.

Check Price at Amazon

Buying Guide for Live Center For Woodturning

Take a look at a few things to ensure you receive the best deal live center for woodturning.

Stability of Live Center For Woodturning

The majority of live center for woodturning have a short lifespan. Only a some of the live center for woodturning have the potential to last a lengthy time. Longevity may be ensured by inspecting the construction quality.
You should check what the item is made of. Higher quality can also increase the price.To have a better idea, compare the items.

Specification

What sort of material do you require? It’s essential to figure out which type you’ll need. The suitable kind will effectively satisfy your requirements.
Examine the item’s specifications. Check the item to verify whether it meets your standards.

Profit Margin

The price-to-quality ratio should be high. Smaller budget does not mean you have to get bad live center for woodturningitem.
A large number of live center for woodturning are available at a modest cost. Not because everything that costs a lot is better.

Final Note

You can find the best live center for woodturning by doing some research. I believe these reviews aid you in making your final decision!
Check out the buyer’s guide for more info. Both in terms of profitability and longevity, these live center for woodturning are outstanding. Focusing attention to all the details can assist you in achieving the best possible outcome.